How to Eliminate WiFi Deadspots with These Simple Steps

[human_a]

How to Eliminate WiFi Deadspots with These Simple Steps

Not only WiFi dead spots, but these methods will also help you get rid of various WiFi connectivity related problems like a low signal, low internet speed, etc. So, let’s check out how to eliminate WiFi dead spots.

1. Find the Problem Areas

Find the Problem Areas

Well, before trying to eliminate the WiFi Deadspots, its important to know the problematic areas. You actually don’t need any software to identify the dead spots. Just pick up the smartphone, connect with the wireless network and walk around the house. You need to pay close attention to the WiFi signal indicator of your smartphone. If the WiFi signal strength drops to zero, then you have just discovered a dead zone.

Alternatively, you can use the WiFi Analyzer app on your Android smartphone to know the detailed information about the WiFi signal strength. WiFi Analyzer for Android also shows the frequency of other surrounding networks as well.

2. Move The Router To The Central Location

Move The Router To The Central Location

If your router is in one corner of your office or house, and your phone is not receiving the signal exactly in the opposite corner, then it’s not a dead zone. So, in that case, you need to place your Router in the Central location. Always try to position the router in the central location of your house, apartment or office. Once done, check whether your device is still getting a poor WiFi signal or not.

3. Use The Least Congested Wireless Channel

Use The Least Congested Wireless Channel

Well, if you are living in a densely populated area, then wireless networks can impact speeds. Most of the new WiFi routers automatically switches to the least congested channel, but lots of cheap routers will just use the predefined channel, even if it isn’t the right one. You can use Android apps like WiFi analyzer to identify the least congested wireless channel for your WiFi network. Once done, you can change the settings on your router to eliminate the dead spots.

4. Check Router Position

Check Router Position

Sometimes when the router sits between any electronic device then it tends to behave in such a way that the signal gets restricted from some portion of the area. Users end up getting poor or no signal at all. So, If you are also facing any dead spot then try to alter the positioning of your WiFi router and place it away from any electronic device. WiFi routers need to be free from electronic equipment, especially the ones that depend on signals like Radio.

5. Update Hardware and Firmware

Update Hardware and Firmware

Changing the Router or any WiFi related hardware that has been too old could be the great thing that you could do to ensure better performance for the network connection. You should update the router as well as any wireless adapter, this could be done through checking up the manufacturers of the hardware and then asking their help.

6. Use Wifi Extender

Use Wifi Extender

You can use the WiFi extenders that are the devices that could help you to widen the WiFi connection signal. WiFi extenders act as a middle between your WiFi router and your device. It first receives the signal from the Router and then extends it to the device. Now if you find any dead spot in between the limit area of your WiFi connection you could eliminate it by using the WiFi extenders.

7. USB Adapter

USB Adapter

Some old computers or router doesn’t have an antenna. Laptop users have a built-in WiFi on the motherboard, but the WiFi doesn’t have an antenna. So, if you are getting a weak wifi signal at the laptop, then you could purchase a USB adapter. This device performs the same job as PCI-E or built-in adapter, expect that they plug into a USB port.

8. Alter Router Antenna

Alter Router Antenna

If the Router you are using has an extended Antenna which can be moved in either direction then try to set up the direction of the antenna in such a way by which you get up most signal strength throughout. The best position for the antenna could be standing erect in the vertical position as this also does not block it from the electrical waves inside the router or other devices.